Difficult Areas
1) If there are obstacles in the room such as a heating pipe or room partitions perpendicular to the floor, first cut the plates to the appropriate length. Then put the pieces next to the area where they will be laid. Mark the places that need to be engraved with the help of a scale. Now drill the holes and make sure to leave 10mm of space on each side. Cut the plate at a 45° angle to the holes, this will expand the space you can use glue. Apply the adhesive and ensure that the parts adhere tightly to each other with the help of a vise.
2) In order to install under the door frame, first extend the panel towards the frame with the decor side of the plate facing down. Then shorten the case with a handsaw and insert the panel under the case, this time with the decor paper on top.
3) In areas large enough to require more than 12 panels in length and 8 panels in width, extra space should be left. This gap is left on the ledges and corners where the rooms meet in the doorway. It is recommended to get extra space by cutting the locks of the panels coming around the joint profiles.
